Tulsa Sprinkler Systems: Make Sure They’re Ready for Spring

Soon it will be time to start watering your lawn once again. However, before you start the sprinkler system for your Tulsa home, there are several things you’ll need to do to ensure the irrigation system’s components are not damaged.

However, it is always best to hire a professional Tulsa irrigation company to perform the spring start-up maintenance for your smart_controllerssprinkler system. These sprinkler system experts can ensure all of the components are working correctly and that your sprinkler system will conserve water, saving you time and money.  They fully understand the hydraulics involved in the piping system along with the best placement for sprinkler heads, and the best watering schedule for your specific lawn, soil, and various plants and shrubs.

Hunter Industries also provides a great spring start-up guide with photos to help you make sure your Hunter sprinkler system is ready to use.

But before you begin any of these start-up procedures, you’ll need to ensure the ground is not still frozen. Use a shovel to make sure the soil is frost-free at least 12 inches below the surface. Filling the system when the ground is still frozen can cause significant damage to sprinkler system pipes.

Check all of the Tulsa sprinkler system components such as valves, sprinkler heads, nozzles, and pipes to ensure that none are broken, cracked, or chipped. If any of these components are damaged, replace the parts before turning on your sprinkler system. It’s very important to make sure that all of the valves are working properly and not leaking. Make sure there are no leaves, dirt, or other debris blocking the sprinkler heads. Check and clean the main irrigation controller and ensure everything is set properly.

Usually about once a month, it’s important to check the sprinkler system for any leaks or broken components. Regular irrigation system maintenance will help keep your system running properly and help you save water.

When you open the main water valve, be sure to open the valve very slowly to allow water to fill the pipes. If these valves are opened too quickly, a surge of air pressure from the rushing water can cause the main lines to crack or burst. Then slowly fill each zone of the irrigation system. This high-pressure surge or “water hammer” is one of the biggest problems in sprinkler system start-ups, so read the manual for your particular sprinkler system before beginning the start-up or call a professional irrigation company to perform the start-up tasks.

Once you have filled the lines of the irrigation system, you can test the system by running each zone, starting it from the controller. Then walk through the running zone and check that the water pressure is in the proper operating range with a water pressure gauge. Low pressure can indicate a line break, and too much pressure can crack or burst pipes or sprinkler components. Also check to make sure sprinkler heads are aligned properly and watering the right areas of the lawn as well as checking valves, nozzles, and other components for leaks or cracks. Then you can set the valves to their regular operating positions.

Ensure the sprinkler system timer programs are set properly for each zone.  You may also need to replace the controller back-up battery, Hunter Industries noted.

Again, it’s best to have a professional make sure your sprinkler system in Tulsa is working properly and ready for spring. The Tulsa sprinkler system experts at Oklahoma Landscape can design, install, monitor, and maintain your entire irrigation system. We offer smart controllers and ET weather sensors to automatically adjust daily run times based on your landscape’s needs and onsite weather conditions. These sensors are economical and can reduce your water consumption by as much as 50% while creating a healthier lawn.

Call us today to ensure your Tulsa sprinkler system is working properly and running most efficiently.

Tulsa Irrigation System Maintenance – Is It Important?

Irrigation systems can help keep your lawn healthy and looking great all summer by giving your lawn the right amount of regular watering it needs. Lawns that are healthy are usually less susceptible to insects, weeds, disease, and drought. Healthy lawns help to lessen surface water runoff and soil erosion. Thus, your Tulsa irrigation system plays a key role in maintaining a vibrant, healthy lawn, as well as helping with water tulsa sprinkler systemsconservation, and reducing the amount of time you have to spend maintaining your lawn. But, just as your lawn needs regular maintenance, your irrigation system will also need regular maintenance in order to function properly. What can you do to make sure your Tulsa irrigation system is working properly?

At both the beginning and end of the season, your automatic irrigation system will require a thorough check-up and maintenance. It’s often best to have a professional Tulsa irrigation specialist perform the spring start-up maintenance and then also winterize your irrigation system in autumn.

But throughout the season, regular inspection of your irrigation system will ensure it’s still functioning properly and help to prevent a costly sprinkler repair.

So, every month or so, it’s important to check the irrigation system for broken components or leaks.

Make sure sprinkler heads and nozzles are not broken and are aligned correctly, watering the proper area of the lawn. Brown spots or constant damp spots in your lawn are both indications that your sprinkler system may have a damaged component or that the sprinkler heads are facing the wrong way. You may need to adjust the sprinkler heads a little to ensure they are watering the lawn and not the sidewalk or home. Also check to see that plants or other objects are not blocking the sprinkler.

Replace any broken or damaged sprinkler heads or nozzles. These components can often be damaged by lawn mowers and other equipment, get clogged, or just can begin to wear out over time.

Inspect your entire Tulsa irrigation system for any leaks and for the right amount of water pressure. When checking your automatic irrigation system for leaks or improper water pressure, it’s good to run the system only one zone at a time so that you can identity any problem spots more readily. Low pressure can often indicate a line break.

Proper winterization of your Tulsa irrigation system is key to ensuring that pipes do not break during the cold winter weather and that everything will work properly again come springtime.

The Tulsa automatic irrigation system specialists at Oklahoma Landscape are skilled at designing, installing, checking, and maintaining your whole sprinkler system. We can handle all of the maintenance and perform regular system audits as well as winterization of your Tulsa irrigation system to make sure it’s always working at its highest level of performance. We service all brands of irrigation systems and sprinklers and can effectively diagnose any problems quickly so that you conserve water and your lawn continues to be, lush, vibrant and healthy.

 

Tulsa Sprinkler Systems: Vital to A Vibrant Lawn

Of course, we all want a lush, green lawn for the summer. How though can you attain lawn excellence in the penetrating Oklahoma heat? One crucial step to having a great lawn is an effective Tulsa sprinkler system.

First, we have to ask, why do you need a sprinkler system for your lawn? Well, there are many benefits…lawn care tulsa

As opposed to a hose-end water sprinkler, an automatic sprinkler system alleviates the hassle of moving the sprinkler to various areas and timing how long you’ve watered. You can simply set a schedule for when and how much to water in each lawn care zone.

The control you have with an automatic sprinkler system helps you save water and thus save money. Smart irrigation controllers can automatically determine the proper amount of water needed with the help of ET weather sensors and adjust daily run times for specific areas of the lawn, reducing water usage by one third or more. ET weather sensors measure evapotranspiration rates of the lawn. They transmit on-site weather conditions from your lawn to the controller, which then changes the amount of water applied to the lawn. Different areas of the lawn can be separated into different zones with their own watering schedules. With these precise systems, you can reduce as much as half of your lawn water consumption while preventing either under or over-watering of your lawn.

Because of recurrent droughts in the state, water conservation has become an even greater concern in recent years. With these automatic sprinkler systems in Tulsa, you can easily comply with any water restrictions in the city or neighborhood. The system can be simply programmed to adapt to all these changing factors.

With zones of your lawn receiving individual watering schedules, your lawn can be much healthier and more vibrant. Individualizing irrigation to the needs of each precise area can help each area be considerably healthier. Shrubs, trees, flowerbeds, and different areas of the lawn with different moisture needs will receive just the amount of water they need. Again, this not only helps your lawn look great but also reduces lawn care costs.

While an unobserved leak in a hose-end sprinkler can be costly and harm your turf from overwatering, professional irrigation systems in Tulsa allow the irrigation company to quickly detect and resolve any irrigation issues with remote diagnostics. A professional system means you also have a professional team of Tulsa lawn care and irrigation specialists to assist you in knowing the best irrigation practices for your particular lawn and someone to check and sustain your system, keeping it at its optimal performance.

An automatic sprinkler system gives you a nice amount of advantages over manual sprinklers while saving you money, time, and frustration. Call Oklahoma Landscape for more information on the best sprinkler system for your Tulsa lawn.